Canon NP2120 Service Manual page 138

9. Mounting the Thermal Switch
switch is evenly in contact with the surface of the
upper fixing roller.
Make sure that the hook of the thermal switch
holder is securely engaged with the fixing assembly
upper plate.
Thermal switch holder
Figure 4-99
Note:
The thermal switch need not be adjusted; if
the contact is not even, check if the thermal
switch spring is deformed.
Do not use mounting screws otherthan those
specified.
upper roller
Figure 4-l OO
4 - 3 2
10. Positìon of the Paper Guide
mount.
not be adjusted.
Fixing assembly
Thermal switch
Thermal switch
C A N O N NP2120/2MO REY.0 MA" 1990 PAINTED IN JAPAN IIMPRIME AU JAPONI
The paperguide is positioned by the paper guide
Assuch,thepositionofthepaperguideneed
Note:
The position of the paper guide needs to be
adjusted if the paper guide mount has been
removed; therefore, do not loosen the screw
position on the fixing assembly mount using
a scriber before loosening the screw.
Note:
To adjust the position of the paper guide,
place the fixing assembly on a desk, and
move the paper guide mount so that it is
positioned as shown in Figure 4-I 01.
Figure 4-l 01