Illuminating Unit - Canon NP2120 Service Manual

A. Illuminating Unit
Remowing the Scanning bamp
1.
Disconnect the power plug.
3)
light shutter.
Figure 4-53
4) Push the lamp electrode plate (rear) in the
direction of the arrow. and remove the scanning
lamp.
Figure 4-54
4-l 8
Note:
Wait until the scanning lamp has cooled
iii. Dry wipe the scanning lamp if it is soiled.
2. Remowing the Thermal Fuse
1) Remove the control panel, and remove the
copyboard glass.
2) Hold the rear side of the No. 1 mirror unit, and
move it to the right as shown in Figure 4-55.
Note :
Be sure to hold the rearsídewhen moving the
No. 1 mirror mount.
Figure 4-55
3) Remove the two mounting screws, and remove
the thermal fuse.
CANON NPZl2012020 RN.0 MAY 1990 PRINTEO IN JAPAN IIMPRIME AU JAPONI