4. Registratíon Roller
rear cover.
1) Remove the
2) Disconnect the connector, remove the grip stop
Figure 4-36
3) Remove the spacer E-ring, and tension spring
@ E-ring
Figure 4-37
5) Open the front door, and remove the inside
covers (left, right).
4 - 1 4
6 ) RemovetheE-ring,tensionspring,andbushing,
and remove the registration roller.
Figure 4-38
CANON NP2,20/2020 RN.0 MAY 1990 PAINTED IN JAPAN IIMPAIME AU JAPONI