Canon NP2120 Service Manual page 135

3. Fixing Heater
Fastons
Figure 4-87
3) Remove the mounting screw, and remove the
heater mounting plate (front).
Mounting screw
Heater mount plate (front)
Figure 4-88
4) Remove the mounting screw, and remove the
heater mount plate (rear); thereafter, slide out
the fixing heater.
Figure 4-89
M E C H A N I C A L S Y S T E M mm
4. Upper Fixing Roller
1) Hold the grip of the oil application roller, and pull
to the front while lifting to remove the roller.
Figure 4-90
2) Remove the fixing heater.
3) Remove the thermoswitch holder.
Figure 4-91
4) Lift the clep, and remove the thermistor cover;
then, remove the thermistor.
Figure 4-92
4-29