Setup Utility - Panasonic CF-29 Series Reference Manual

Setup Utility

Running the Setup Utility
1
Turn on or restart the computer.
2
F2
Press while [Panasonic] boot screen is displayed soon after the
computer begins the startup procedure.
If [Enter Password] is displayed, enter your password. When a User Password is
entered, some contents cannot be changed.
NOTE
If you fail to press F2 at the right moment, the Setup Utility will not start up. In this
case, power off the computer and try again.
To close the Setup Utility, press Esc, select the exiting method in [Exit] menu, then
press Enter.
When the Setup Utility is started with Supervisor Password
You can register all items of the Setup Utility.
When the Setup Utility is started with User Password
You can not register [Advanced] and [Boot] menu.
[Set Supervisor Password] and [Hard Disk Lock] will not be displayed on [Security] menu.
The User Password can be changed only when [User Password Protection] has been set
to [No Protection]. The User Password cannot be deleted.
[Get Default Values] will not be displayed on [Exit] menu.
F9 does not work.
NOTE
When [Password on boot] in the Setup Utility is set to [Disable], the password is not
necessary when the computer is started up, but the password becomes necessary
when the Setup Utility is started up. This alternative makes it possible to prevent the
contents of the Setup Utility from being changed.
88