Panasonic CF-29 Series Reference Manual page 77

Modem
Ring Resume Function
Enabling the Ring Resume Function
NOTE
Do not enter either the standby or hibernation mode during communications.
With this function, if the telephone that is connected to the modem rings in the standby mode,
the power of the computer automatically switches ON.
This function is convenient when using automatic information receiving applications such as
a FAX application.
When using this function, it is necessary to run a software application able to maintain the
condition to receive telephone calls and to return the computer to the original condition after
a call. For further details, refer to the operating instructions provided with software
applications.
Windows XP
1
Select [Device Manager] in [Start] - [Control Panel] - [Performance and
Maintenance] - [System] - [Hardware] and then select the internal modem
from [Modems].
2
Select [Power Management], add the check mark for [Allow this device to bring
the computer out of standby], then select [OK].
Windows 2000
1
Select [Device Manager] in [Start] - [Settings] - [Control Panel] - [System] -
[Hardware] and then select the internal modem from [Modems].
2
Select [Power Management], add the check mark for [Allow this device to bring
the computer out of standby], then select [OK].
CAUTION
When using this function, it is recommended that the AC adaptor be connected to the
computer.
Concerning the setting for [System standby]
77
*1