Panasonic CF-29 Series Reference Manual page 70

External Display
Graphics] - [Devices].
Windows 2000
Select [Start] - [Settings] - [Control Panel] - [Intel(R) Extreme Graphics] - [Devices].
2
Select [Extended Desktop], make the settings for [Primary Device]
and [Secondary Device].
To make the settings for each display (colors, screen area, etc.), select [Device
Settings] and change the settings where necessary, then select [OK].
3
Select [OK].
At the confirmation message, select [OK].
NOTE
There are some applications that cannot be used in the Extended Desktop.
When the button to maximize a window is pressed, one of the displays will show the
maximized display.
A window that has been maximized cannot be moved to the other display.
You cannot switch the display destination by pressing Fn+F3.
The pop-up window displayed by Fn key combination is shown only on the primary
device.
When changing the primary device ([1]) and secondary device ([2]), be sure to
change them in the following menu. If you use other procedures, the window may not
be displayed properly.
Windows XP
Select [Start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme
Graphics] - [Devices]. - [Extended Desktop]
Windows 2000
Select [Start] - [Settings] - [Control Panel] - [Intel(R) Extreme Graphics] - [Devices]. -
[Extended Desktop]
<Only for models with touchscreen>
The cursor will move on the primary device if the surface of the internal LCD is
touched. Set the primary device to the internal LCD when using the touchscreen.
70