Boot Menu - Panasonic CF-29 Series Reference Manual

Setup Utility

Boot Menu

*1
Floppy Drive
Hard Disk Drive
*2
CD Drive
*3
LAN
*1
This displayed even if the floppy disk drive is not inserted or [Floppy Operation] is set to [Disable].
The following drive can be used for startup as an alternative to the internal floppy disk drive.
Panasonic USB floppy disk drive (optional:CF-VFDU03)
However, when both the internal floppy disk drive and optional USB floppy disk drive are connected,
the internal floppy disk drive will be used for startup.
*2
This is displayed even if a CD drive is not connected.
*3
This displayed even if [LAN] is set to [Disable] on [Advanced] menu.
The default order is as follows:
[Floppy Drive] -> [Hard Disk Drive] -> [CD Drive] -> [LAN].
To move a device up by one in the order, select the device with
To move a device down by one in the order, select the device with
F5.
NOTE
[Boot] menu cannot be changed when the Setup Utility is started up with the User
Password.
Boot Menu
The device for starting up the operating system can also be selected during computer
start-up. After the computer is turned on, and Esc is pressed at [Panasonic] boot
screen, [Boot Menu] (the device selection display) will appear. When the setting of
[Boot] menu is changed, the selection screen display will also change. [Boot Menu] is
displayed only when [Boot First Menu] in [Security] menu is set to [Enable].
97
, and then press F6.
and
and , and then press