Panasonic CF-29 Series Reference Manual page 40

Security Measures
5
Enter your password at [Enter New Password] and press
To disable the User Password
Press only Enter.
6
Re-enter your password at [Confirm New Password] and press
Enter
.
To disable the User Password
Press only Enter.
7
At [Setup Notice], press
8
F10
Press and select [Yes], then press
CAUTION
Do not forget your password. If a password is forgotten, you will be unable to use your
computer. If this happens, log on with the Supervisor Password, or ask a person who
knows the Supervisor Password.
When running the Setup Utility, do not leave your computer even for a short time, as
the possibility exists for the password to be set/changed by another person.
NOTE
Your password will not be displayed on the screen.
Only up to seven alphanumeric characters can be used.
• There is no distinction between upper and lower case letters.
• Use only the upper horizontal row of numeric keys to input your password.
• Do not input your password while holding down on Shift or Ctrl.
When you do not want the User Password enabled or changed without permission:
1
Run the Setup Utility and enter the Supervisor Password.
2
Go to [Security] menu. Using
press Enter.
3
Using either
Enter
.
and , select [User Password Protection] and
, select [Protected] and press Enter.
or
40
Enter
Enter
.
.