Touch Pad - Panasonic CF-29 Series Reference Manual

Touch Pad

Use the touch pad to move the cursor on the display and perform normal computer
operations.
CAUTION
By design the touch pad is to be used with a finger tip only. Therefore, do not use any
implement which causes damage on the work surface.
A. Work Surface (touch pad)
B. Left Button
C. Right Button
The touch pad has the following two modes of operation.
®
Microsoft IntelliMouse™ Wheel Mode
(Setting at the time of purchase)
Wheel mode operations (almost identical to
the case of using the Microsoft
IntelliMouse™ for scroll, zoom, etc.,
operations) are possible for Microsoft
wheel function-compatible applications.
®
Microsoft IntelliMouse™ is a mouse-type
device that, in addition to the two
conventional buttons, incorporates a wheel
able to rotate forwards/backwards.
Scrolling Area
D.Scrolling up/down
For the Pan and Auto
Scroll functions, the
entire work surface of
the touch pad can be
used for scrolling.
Typical mouse operations use the area (F): When no check mark is added for [IntelliMouse
Wheel mode], [Horizontal] and [Vertical] of [Scroll Configuration], the entire surface can be
used for typical mouse operations.
Only scroll operation is possible for
applications not compatible with the
®
®
Microsoft
® Even for applications compatible with the
®
Microsoft
where only vertical scrolling or only
horizontal scrolling is possible in this mode.
12
Original Mode
wheel function.
wheel function, there are cases
Scrolling Area
D.Scrolling up/down
Possible when a check
mark is added for
[Vertical].
E.Scrolling side-to-side
Possible when a check
mark is added for
[Horizontal].