Inserting A Pc Card - Panasonic CF-29 Series Reference Manual

PC Cards
Inserting/Removing the PC Card

Inserting a PC Card

1
Open the cover by sliding the latch (C) to the right.
2
Simply slide the PC Card in with label-side up (A) until it snaps into
place.
Refer to the operating instructions of each card on how to insert the card (insertion
is typically label-side up).
CAUTION
When using a PC Card to connect a peripheral device (SCSI, IEEE 1394, etc.):
1
Connect the peripheral device to the card.
2
Turn the device on.
3
Slide the card in until it snaps into place.
When inserting a card, do not force the card in if difficulty is encountered. Depending
on the shape of the card, a segment may remain protruding from the slot after
insertion. Do not try to force the card all the way in. You may damage the slot,
making it impossible to remove the card.
61