Setting The Supervisor Password - Panasonic CF-29 Series Reference Manual

Security Measures
Starting Up When the Password is Set

Setting the Supervisor Password

(enabling, changing, disabling)
When [Password on boot] of [Security] menu is set to [Enable] (
and press Enter.
*1
password
When the correct password is inputted, the computer will start.
When three incorrect password attempts or nothing is input for one minute
computer will power off.
*1
Supervisor Password or User Password set in the Setup Utility (not the Windows password).
*2
If the setup utility has been started up, the power will not be turned off even after one minute has
passed.
1
Run the Setup Utility. (
2
Using either
3
Using either
Enter
.
4
Only when the Supervisor Password has been set:
Enter your password at [Enter Current Password] and press
5
Enter your password at [Enter New Password] and press
To disable the Supervisor Password
Press only Enter.
6
Re-enter your password at [Confirm New Password] and press
Enter
.
To disable the Supervisor Password
Press only Enter.
7
At [Setup Notice], press
8
F10
Press and select [Yes], then press
page 88)
or , select [Security].
or , select [Set Supervisor Password] and press
Enter
.
38
page 88), enter your
*2
, the
Enter
Enter
.
Enter
.
.