Panasonic CF-29 Series Reference Manual page 21

Touch Pad
8
The display will ask you to restart Windows. Select [Yes].
The computer will start.
<When [touchpad/touchscreen](models with touchscreen) or [touchpad](models
without touchscreen) is displayed>
1
Select [OK].
<Only for models with touchscreen>
10
Perform the touchscreen calibration.(
Windows 2000
1
Uninstall the driver or application software of an external mouse or
trackball. (Refer to the operating instructions of the external device on
how to uninstall the driver.)
If the explanation of uninstalling the driver or application software can not be found
in the operating instructions for the external device, execute the following steps.
1
In [Start] - [Settings] - [Control Panel] - [System] - [Hardware] - [Device
Manager], when an external mouse or trackball is displayed in [Mice and other
pointing devices], press Del to delete it.
2
If the confirmation message is displayed, select [OK].
2
If the display asks you to restart Windows, select [No].
3
Power off your computer (⇒Operating Instructions "Starting Up/
Shutting Down")and remove the external mouse or trackball.
4
Turn the power on and run the Setup Utility (
5
In [Main] menu, set [Touch Pad] and [Touchscreen] (only for models
with touchscreen) to [Enable].
6
Close the Setup Utility by pressing
select [Yes].
7
Log on to Windows with the administrator authority.
21
page 26)
page 88).
F10
. At the confirmation message,