Panasonic CF-29 Series Reference Manual page 17

Touch Pad
When you want to use an external mouse through the external keyboard/mouse port
When an external mouse or trackball with additional functions (e.g., wheel function) is
connected, a part or all of the additional functions may fail to operate. To use these additional
functions, perform the operation below.
If you are using a USB mouse, the following operation is unnecessary.
Windows XP
1
Power off your computer (⇒Operating Instructions "Starting Up/
Shutting Down") and connect the external mouse or trackball to the
computer.
2
Turn the power on and run the Setup Utility (
3
In [Main] menu, set [Touch Pad] and [Touchscreen] (only for models
with touchscreen) to [Disable].
4
Close the Setup Utility by pressing
select [Yes].
5
Log on to Windows with the administrator authority (only necessary
when multiple accounts are created).
6
When the message [Completing the Found New Hardware Wizard] is
displayed, select [Finish].
It may take a few minutes to complete this operation.
7
If the display asks you to restart Windows, select [Yes].
The computer will restart.
8
Following the operating instructions of the connected external mouse
or trackball, install the necessary driver.
NOTE
When you want to use the PS/2 compatible mouse:
1
Select [Start] - [Control Panel] - [Performance and Maintenance] - [System] -
[Hardware] - [Device Manager] - [Mice and other pointing devices].
17
page 88).
F10
. At the confirmation message,