Setup Utility - Panasonic CF-37 series Reference Manual

Setup Utility

Running the Setup Utility
To run the Setup Utility, you
need to restart your computer.
Upon seeing
this message
NOTE
Press F2 while [Press <F2> to enter SETUP] is displayed.
The Setup Utility will not run if
starts. In this case, you need to restart your computer.
If [Enter Password] is displayed, enter your password.
When entering the User Password, if the [Set User Password], [Set Supervi-
sor Password] and [User Password Protection] have been set, [Advanced] menu
will not be displayed on the main screen.
To display the [Advanced] menu:
1
Restart the computer and press
displayed.
2
When [Enter Password] is displayed, enter the Supervisor Password.
For more details, on-line help is available; press
NOTE
Key Operations
F1
Enter
Esc
F5
F9 *
F10
* When starting up the Setup Utility with the User Password, this key is not available.
Closing the Setup Utility (Exit Menu)
Press <F2> to enter SETUP
F2 is not pressed soon after the computer
F2 when [Press <F2> to enter SETUP] is
F1 .
:
To display the "General help" file.
:
To display sub-menu.
:
To display [Exit] menu.
:
To move among the menus.
:
To move among the items.
:
F6 To move among the values.
:
To set default settings for the operating system.
:
To save the settings and exit.
page 52
47
press F2