Setup Utility - Panasonic CF-W4 Series Reference Manual

Setup Utility

Running the Setup Utility
XXXXXXXXXX
X.XXGHz
X.XX GHz
XXX MB
XX GB
XXXXXXXX
X hours
The Setup Utility sets the computer's boot-up operating environment, i.e. passwords, startup
drive, etc. The following six menu items are available:
[Information], [Main], [Advanced], [Security], [Boot], [Exit]
1
Turn on or restart the computer.
2
Press the
F2
after the computer begins the startup procedure.
When the password is set, the screen shown at left will be displayed. Enter your
password, and press the Enter key.
When inputting the Supervisor Password
You can register all items of the Setup Utility.
When inputting the User Password
On the [Advanced] and the [Boot] menu:
• You can view the settings, but cannot change it.
On the [Security] menu:
• The following will not be displayed: [Clear registered SD card], [Set
Supervisor Password], [Hard Disk Lock] and [Embedded Security (TPM)
Sub-Menu].
• The following will be displayed, but cannot be set: [Execute-Disable Bit
Capability], [Password on boot], [SD Startup], [SD Setting Method], [Setup
Utility Prompt], [Boot First Menu], and [User Password Protection].
• The User Password can be changed only when [User Password
Protection] has been set to [No Protection]. The User Password cannot be
deleted.
On the [Exit] menu:
• [Get Default Values] option will not be displayed.
The F9 key does not work.
key while [Panasonic] boot screen is displayed soon
138