Setup Utility; Key Operations - Panasonic CF-T2 Series Reference Manual

Setup Utility

Running the Setup Utility

Key Operations

1
Turn on or restart the computer.
2
F2
Press while [Panasonic] boot screen is displayed soon after the
computer begins the startup procedure.
If [Enter Password] is displayed, enter your password. When a User Password is
entered, some contents cannot be changed. (
NOTE
If you fail to press F2 at the right moment, the Setup Utility will not start up. In this
case, power off the computer and try again.
To close the Setup Utility, press Esc , select the exiting method in [Exit] menu, then
press Enter .
F1
To display the corresponding "help" file.
Esc
To display [Exit] menu.
To move among the items.
To move among the menus.
F5 F6
To move among the values.
Enter
To display sub-menu of each item selected by
F9
To set default settings (except the password). (When starting up the Setup Utility with
the User Password, this key is not available.)
F10
To save the settings and exit.
88
page 29)
or .