Panasonic CF-29 Series Reference Manual page 39

Security Measures
Setting the User Password (enabling, changing, disabling)
CAUTION
Do not forget your password. If your Supervisor Password is forgotten, you will be
unable to use your computer. Contact Panasonic Technical Support.
When running the Setup Utility, do not leave your computer even for a short time, as
the possibility exists for the password to be set/changed by another person.
NOTE
Your password will not be displayed on the screen.
Only up to seven alphanumeric characters can be used.
• There is no distinction between upper and lower case letters.
• Use only the upper horizontal row of numeric keys to input your password.
• Do not input your password while holding down on Shift or Ctrl.
Disabling the Supervisor Password also disables the User Password.
NOTE
When the Supervisor Password has not been set, the User Password can not be set.
Set the Supervisor Password if you have not done so. (
To disable the User Password, start up the Setup Utility with the Supervisor Password.
1
Run the Setup Utility. (
2
Using either
3
Using either
4
Only when the User Password has been set:
Enter your password at [Enter Current Password] and press
page 88)
or , select [Security].
or , select [Set User Password] and press
39
page 38)
Enter
.
Enter
.