Removing A Pc Card - Panasonic CF-29 Series Reference Manual

PC Cards

Removing a PC Card

CAUTION
Do not remove a PC Card while your computer is in the standby or hibernation mode.
When two PC Cards are inserted, perform the following procedure (from Step
3
Step for each of the two cards.
Note that the operation of removing the PC Card may not be complete, depending on
the status of the PC Card or device connected to the PC Card, such as when a SCSI
card is used to connect an external hard disk to the computer. In such cases, turn off
the power from [Start] menu, then remove the card.
1
Disable the card function.
Windows XP
1
Select on the taskbar, select the PC Card, then select [Stop].
2
Follow the on-screen instructions.
(When the PC Card has been removed after the computer is turned off, this step
is not necessary.)
Windows 2000
1
Select on the taskbar, select the PC Card, then select [Stop].
2
Follow the on-screen instructions.
(When the PC Card has been removed after the computer is turned off, this step
is not necessary.)
2
Press the button (B).
3
Slide the PC Card out.
NOTE
If the button is sticking out, press it back to its original position.
62
1
to