Panasonic CF-29 Series Reference Manual page 42

Security Measures
Preventing theft or damage to data using a disk
Procedure
CAUTION
To change your hard disk drive
• Contact Panasonic Technical Support.
• Before changing the hard disk, be sure to set the [Hard Disk Lock] to [Disable].
Disabling the floppy disk operation makes it impossible to read and write a floppy disk and to
start the computer from a floppy disk. This can prevent data from being accessed illegally or
overwritten accidentally using a floppy disk.
1
Run the Setup Utility. (
2
Using either
3
Using either
4
Select [Enable] or [Disable].
To enable the floppy operation
Select [Enable] and press Enter.
To disable the floppy operation
Select [Disable] and press Enter.
5
F10
Press and select [Yes], then press
page 88)
or , select [Security].
or , select [Floppy Operation] and press
42
Enter
Enter
.
.