Panasonic CF-29 Series Reference Manual page 84

Wireless LAN
Check the Communication Status
4
Select [Networks] and select [Add].
5
Enter the profile name and network name (SSID), and then make
other necessary changes, then select [Next].
6
Make necessary changes and select [Finish].
7
Select [OK].
NOTE
About WLAN Security Client
WLAN Security Client is an implementation of the client side of the IEEE 802.1X-Port
Based Network Access Control protocol.
• Since the WLAN Security Client has already started when
taskbar, do not double-start it. If
Client in the following menu.
Windows XP
Select [Start] - [All Programs] - [Intel] - [WLAN Security Client Manager].
Windows 2000
Select [Start] - [Programs] - [Intel] - [WLAN Security Client Manager].
• For more information about how to use the WLAN Security Client, refer to [Help] in
the menu bar or;
Windows XP
Select [Getting Started Guide] or [User's Guide] in [Start] - [All Programs] - [Intel].
Windows 2000
Select [Getting Started Guide] or [User's Guide] in [Start] - [Programs] - [Intel].
Select or on the taskbar to check the communication status.
For more information about how to use the Intel PROSet, refer to [Help] in the menu bar.
is not displayed, start up the WLAN Security
84
is displayed on the