Setting The Operation Mode; Setting The Record Rate - Sony MAV-555 Installation Manual

1-9. Settings upon Completion of Installation
9. Turn off the main power once.
n
To re-start the system swiftly, execute [027-FAST
REBOOT] from the setup menu.

1-9-3. Setting the Operation Mode

1. Open the [019 OPERATE CONFIG] display from the
setup menu.
2. Press the VIDEO/MENU knob once and open the
SubMenu.
019 OPERATE CONFIG
3. Turn the VIDEO/MENU knob and select the operation
mode.
PANEL : When the PANEL is selected, the
entire system can be controlled from
the control panel (BKMA-505) only.
DTR + PANEL : When the DTR + PANEL is select-
ed, the entire system can be con-
trolled from both the control panel
(BKMA-505) and a single DTR-
3000 unit.
DTR + DTR : When the DTR + DTR is selected,
the entire system can be controlled
from two DTR-3000 units.
019 OPERATE CONFIG
4. Press the SET button.
5. Turn off the main power once.
n
To re-start the system swiftly, execute [027-FAST
REBOOT] from the setup menu.
1-14 (E)
PANEL
DTR + PANEL

1-9-4. Setting the Record Rate

1. Open the [035 VIDEO COMP. RATE] display from
the setup menu.
2. Press the VIDEO/MENU knob once and open the
SubMenu.
035 VIDEO COMP. RATE
3. Turn the VIDEO/MENU knob and select the video
record rate.
035 VIDEO COMP. RATE
4. Press the SET button.
5. Open the [028 AUDIO BIT LENGTH] display from
the setup menu.
6. Press the VIDEO/MENU knob once and open the
SubMenu.
028 AUDIO BIT LENGTH
7. Turn the VIDEO/MENU knob and select the audio
record rate.
028 AUDIO BIT LENGTH
8. Press the SET button.
9. Turn off the main power once.
n
To re-start the system swiftly, execute [027-FAST
REBOOT] from the setup menu.
50Mbps
40Mbps
20bit
16bit
MAV-555