Advertisement
LOWR
SHIMMING
Measuring steps:
Set the shift shaft in the forward posi-
tion.
Position the bearing housing puller so
it pushes against the propeller shaft.
Bearing housing puller 1:
90890-06503
Stopper guide plate 3:
90890-06501
Center bolt 4:
90890-06504
Center bolt:
5 Nm (0.5 m • kg, 3.6 ft • lb)
Attach the backlash indicator onto the
drive shaft (16 mm diameter).
Backlash indicator 5:
90890-06706
Attach the dial gauge onto the lower
unit and have the dial gauge plunger
contact the mark on the backlash indi-
cator.
Dial gauge 7:
90890-01252
Flexible stand 8:
90890-06705
Slowly turn the drive shaft clockwise
and counterclockwise. When the drive
shaft stops in each direction, measure
the backlash.
6-31
E
Hide quick links:
Advertisement
Chapters
