Call Recording - Yealink SIP-T29G User Manual

According to the response message from the server, the IP phone will automatically
configure the BLF List keys beginning from the first unused DSS key (The default order of
BLF list keys assigned automatically is Line Key->Ext Key). Once any DSS key is seized,
the IP phone will skip to configure the next DSS key.
You can receive a visual or/and an audio alert (if enabled) on your phone when the
monitored user receives an incoming call. For more information, refer to
(BLF)
on page
The pickup code is used in the following order of preference: BLF List Pickup Code
Note
(Account->Advanced)>Directed Call Pickup Code (Account->Advanced)> Directed
Call Pickup Code (Features->Call Pickup). If all of them are not configured, pressing the
BLF List key will directly call the monitored user when he/she receives an incoming call.
For more information about pickup Code, refer to
You can record calls by pressing a record key on the phone. The SIP-T29G IP phone
supports record and URL record.
Two ways of call recording:
Record: The phone sends SIP INFO message containing a specific header "Record:

on/off" to trigger a recording.
URL Record: The phone sends HTTP URL request to trigger a recording. Contact your

system administrator for the predefined URL.
Note Call record is not available on all servers. Contact your system administrator for more
information.
To configure a record key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press
4. Press
.
129
or , or the Switch soft key to select Key Event from the Type field.
or , or the Switch soft key to select Record from the Key Type field.
Advanced Phone Features
Call Pickup on page 123.
Busy Lamp Field
133