Yealink SIP-T29G User Manual page 114

User Guide for the SIP-T29G IP Phone
you that you still have a call on hold.
To resume a held call:
1. Press
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
Press
-
soft key to retrieve the desired call.
- Press the corresponding line key to retrieve the call.
If more than two calls are on hold, a numbered prompt appears on the LCD screen, for
example "2/4", indicating that this is the second call out of four calls.
You can use DND to reject incoming calls automatically on the phone. The prompt
message "n New Missed Call(s)" ("n" indicates the number of missed calls) will appear
on the LCD screen, and callers will receive a busy message. All calls you receive while
DND is enabled are logged to your missed calls list.
The prompt message will display only if Missed Call Log for the line is enabled. Missed
Note
call log is configurable via web user interface at the path Account->Basic->Missed Call
Log.
Do not disturb is local to the phone, and may be overridden by the server settings. For
more information, contact your system administrator.
You can enable/disable DND for the phone system, or you can customize DND for each
or all accounts. Two DND modes:
Phone (default): DND is effective for the phone system.

Custom: DND can be configured for each or all accounts.

You can receive incoming calls from authorized numbers when DND is enabled.
To configure the DND mode via web user interface:
1. Click on Features->Forward & DND.
104
or the Resume soft key.
or to switch between the calls, and then press or the Resume