Yealink SIP-T29G User Manual page 30

User Guide for the SIP-T29G IP Phone
The phone status is displayed on the first page of the web user interface.
If your phone cannot contact a DHCP server for any reason, you need to configure
network settings manually. The IP phone can support either or both IPv4 and IPv6
addresses.
To configure the IP address mode via phone user interface:
1. Press Menu->Advanced (default password: admin) ->Network->WAN Port.
2. Press
Mode field.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
20
or , or the Switch soft key to select IPv4, IPv6 or IPv4 & IPv6 from the IP