Yealink SIP-T29G User Manual page 27

2) Connect the handset and optional headset
Note
The EXT port can also be used to connect an expansion module
For more information on how to use EHS36,
BT40, refer to
Guide Yealink Bluetooth USB Dongle BT40 User Guide
and
3) Connect the network and power
You have two options for power and network connections. Your system administrator will
advise you which one to use.
AC power (Optional)

Power over Ethernet (PoE)

AC Power (Optional)
To connect the AC power:
1. Connect the DC plug on the power adapter to the DC5V port on the phone and
connect the other end of the power adapter into an electrical power outlet.
2. Connect the included or a standard Ethernet cable between the Internet port on the
phone and the one on the wall or switch/hub device port.
Yealink EHS36 User Guide
EXP38 or
EXP39 and Bluetooth USB Dongle
Yealink EXP38 User Guide
,
.
Getting Started
EXP38 or
EXP39.
Yealink EXP39 User
,
17