Yealink SIP-T29G User Manual page 42

User Guide for the SIP-T29G IP Phone
To change the administrator password via phone user interface:
1. Press Menu->Advanced (default password: admin) ->Set Password.
2. Enter the old password in the Current PWD field.
3. Enter the new password in the New PWD field.
4. Re-enter the new password in the Confirm PWD field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Administrator password is configurable via web user interface at the path
Security->Password.
You can set the "#" or "*" to perform as a send key while dialing.
To configure key as send via phone user interface:
1. Press Menu->Features->Others->General.
2. Press
or select Disabled to disable this feature.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Key as send is configurable via web user interface at the path Features->General
Information.
32
or , or the Switch soft key to select # or * from the Key as Send field,