To configure a static IPv4 address via phone user interface:
1.
Press Menu->Advanced (default password: admin) ->Network->WAN Port.
2.
Press
or
to select IPv4 and then press the Enter soft key.
3.
Press
or
, or the Switch soft key to select the Static IP from the Type field.
4.
Enter the desired value in the IP Address, Subnet Mask, Gateway, Primary DNS and
Secondary DNS fields respectively.
5.
Press the Save soft key to accept the change or the Back soft key to cancel.
To configure a static IPv6 address via phone user interface:
1.
Press Menu->Advanced (default password: admin) ->Network->WAN Port.
2.
Press
or
to select IPv6 and then press the Enter soft key.
3.
Press
or
, or the Switch soft key to select the Static IP from the Type field.
4.
Enter the desired value in the IP Address, IPv6 IP Prefix, Gateway, Primary DNS and
Getting Started
21