Yealink SIP-T29G User Manual page 126

User Guide for the SIP-T29G IP Phone
To disable call forward in custom mode for a specific account:
1. Press Menu->Features->Call Forward or press
2. Press
3. Press
key.
4. Press
forward.
5. Press the Save soft key to accept the change.
Dynamic Forwarding
To forward an incoming call to another party:
1. When the phone is ringing, press the FWD soft key.
2. Enter the number you want to forward the incoming call to.
3. Press
The LCD screen prompts a call forward message.
Note
When the phone forwards a call, a prompt window will pop up by default, if you want to
disable the feature, contact your system administrator for more information.
You can transfer a call to another party in one of three ways:
Blind Transfer: Transfer a call directly to another party without consulting.

Semi-Attended Transfer: Transfer a call when the target phone is ringing.

Attended Transfer: Transfer a call with prior consulting.

To perform a blind transfer:
1. Press
116
or to select the desired account and then press the Enter soft key.
or to select the desired forwarding type and then press the Enter soft
or , or the Switch soft key to select Disabled to disable the call
, , or the Send soft key.
or the Transfer soft key during a call.
when the phone is idle.