2.3 System Data Control
2.3.8
Software Upgrading
Description
It is possible to upload software from a PC to the PBX to upgrade the following:
Main Processing (EMPR/MPR) software
data
Default data of system programming for
each country/area
Language data for PT display
LPR (software on a slot card) software data
(KX-TDA100/KX-TDA200/KX-TDA600 only)
Cell Station (CS) software data
Conditions
•
The software version of the EMPR or MPR can be confirmed through system programming.
Installation Manual References
KX-TDA100/KX-TDA200
2.3.1 MPR Card
KX-TDA600
2.3.1 EMPR Card
Programming Manual References
PC Programming Manual
2.7.3 [1-1] Slot—MPR Card Property—Memory Version:
PT Programming Manual
[190] Main Processing (MPR) Software Version Reference
432
Feature Guide
Data File
Operating system data area on either the EMPR card of the
KX-TDA600, the MPR card of the KX-TDA100/KX-TDA200,
or the Main Board of the KX-TDA30.
Country/area data area on the EMPR card, MPR card, or
Main Board
Each language data area on the EMPR card, MPR card, or
Main Board.
There are two types:
Type 1: PT display except for PT system programming (→
2.3.2 PT Programming) (5 languages max.)
Type 2: PT system programming data (one language max.)
Flash ROM on the slot card (e.g., BRI8)
Flash ROM on the CS
Storage Area