Panasonic KX-TDA30 Features Manual page 355
Hide thumbs
Also See for KX-TDA30:
- Installation manual (428 pages) ,
- Features manual (412 pages) ,
- User manual (258 pages)
Table of Contents
Advertisement
Line, and extension 1012 of PBX-1 is connected to extension 1033 of PBX-2.
Case 3:
A public trunk call directed to extension 1033 arrives at PBX-1.
→ The target extension number is not found at the local PBX, so the call is redirected to the
specified TIE Line, and the call is connected to extension 1033 of PBX-2.
–
Hardware Requirement
The KX-TDA6920, KX-TDA0920 or KX-TDA3920 SD Memory Card for Software Upgrade to
Enhanced Version
–
System programming is required to enable this feature.
–
If a dialled number is not found at a remote PBX, the call cannot be redirected to the local PBX to
search for a matching number.
•
When a TIE line call arrives at a busy extension which has disabled Call Waiting, the caller will hear a
busy tone. If required, Intercept Routing—Busy/DND can be activated.
•
The Inter-digit time can be assigned for TIE line calls.
→ 2.8.4 [2-3] Timers & Counters—Miscellaneous—Receiving Dial Inter-digit Timer—TIE
Programming Manual References
PC Programming Manual
2.7.14 [1-1] Slot—BRI Port—Network Numbering Plan—Trunk Property (for CO port)
2.7.16 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Network Numbering Plan—Trunk
Property (for CO port)
2.7.19 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Trunk Property (for TIE channel)
2.7.25 [1-1] Slot—E1 Port—Trunk Property
2.7.28 [1-1] Slot—E&M Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Trunk Property
2.8.4 [2-3] Timers & Counters—Miscellaneous—Receiving Dial Inter-digit Timer—TIE
2.8.8 [2-6-1] Numbering Plan—Main—Features
→ Idle Line Access (Local Access)
→ Trunk Group Access
→ TIE Line Access
2.8.8 [2-6-1] Numbering Plan—Main—Other PBX Extension
2.8.11 [2-7-1] Class of Service—COS Settings—TRS—TRS Level—Day, Lunch, Break, Night
2.8.17 [2-9] System Options—Option 4—Private Network—TIE Call by Extension Numbering (Optional SD
Card Required)
2.9.1 [3-1-1] Trunk Group—TRG Settings—Main—COS
2.15.1 [9-1] TIE Table
2.16.2 [10-2] DIL Table & Port Settings
→ DIL—Trunk Property
→ DIL—DIL Destination—Day, Lunch, Break, Night
→ DDI / DID / TIE / MSN
2.16.3 [10-3] DDI / DID Table—DDI / DID Destination—Day, Lunch, Break, Night
PT Programming Manual
[453] DID Destination
[500] Trunk Group Number
1.30 Networking Features
Feature Guide
355
Advertisement
Table of Contents
