Panasonic KX-TDA30 Features Manual page 23

[Programming Example of DID/DDI Table]
DDI can be programmed as DID.
Location
No.
0001 123-4567
0002 123-2468
0003 123-456
:
: → 2.16.3 [10-3] DDI / DID Table—DDI / DID Number
*1
→ [451] DID Number
: → 2.16.3 [10-3] DDI / DID Table—DDI / DID Name
*2
→ [452] DID Name
: → 2.16.3 [10-3] DDI / DID Table—CLI Ring for DDI/DID—Day, Lunch, Break, Night
*3
: → 2.16.3 [10-3] DDI / DID Table—DDI / DID Destination—Day, Lunch, Break, Night
*4
→ [453] DID Destination
Note
Tenant number and VPS trunk group number can also be assigned in the DID/DDI table. Tenant number
is used to determine the time mode (day/lunch/break/night) for the corresponding DID/DDI number.
VPS trunk group number is used in Voice Mail DPT (Digital) Integration (→ 1.24.3 Voice Mail DPT
(Digital) Integration).
Explanation:
If the DID/DDI number is "123-4567":
1.
Checks the number in the table.
→ Matches the number in location 0001.
2.
Checks the time mode.
In Day mode: CLI is enabled. Route to CLI destination.
In Lunch mode: CLI is disabled. Route to DID/DDI destination, extension 100.
Conditions
• To use this feature, DID/DDI service must be assigned as the distribution method for a trunk port.
• DID/DDI Number Modification
It is possible to modify a received DID/DDI number, which may be convenient when programming the
DID/DDI table. The modification method (removed number of digits/added number) can be
programmed on a trunk port basis.
[Modification Example]
Removed number of digits: 6
Added number: 10
Received DID/DDI number: 87654321
*1 *2
Name
John White
Tom Smith
A company
: :
*3
CLI
Day Lunch
Enable Disable
Enable Disable
Enable Disable
: :
Modified DID/DDI number: 876543 21 = 1021
1) Remove the
first 6 digits.
1.1 Incoming Call Features
Destination
... Day Lunch
... 105 100
... 102 100
... 101 101
: : :
2) Add "10".
Feature Guide
*4
...
...
...
...
:
23