Installing The Service Provider Software; Configuring The Telephony Driver And Dialing Options; For Windows 3.1 - Panasonic DBS Section 570 TAPI Installation Manual

Section 570 - TAPI Installation Guide

Installing the Service Provider software

You should make a backup copy of the Panasonic Service Provider disk before
beginning the installation procedure. You may proceed with the installation once
the backup copy has been made.
1. Close out all other Windows applications.
2. Insert the Service Provider disk into floppy drive A or B.
3. For Windows 3.1, select File, then Run from the Program Manager screen.
4. In the Command Line box, type a:setup or b:setup (depending on which
Configuring the Telephony driver and dialing
options
After the installation is complete, open the Windows Telephony Control Panel and
configure the Windows TAPI application for use with the Panasonic Telephony
driver.

For Windows 3.1

1. To open the Telephony Control Panel in Windows 3.1, open the Main
2. In the Telephony window, click Location Setup. The Locations window
6
For Windows 95, select Start, then Run from the Windows desktop.
drive you placed the disk in), then press <ENTER>. The Panasonic
Service Provider files will be installed to the same directory containing
your Windows system files (usually Windows/System).
Note: If using Windows 3.1, a new program group called "DBS" will be
added to your Program Manager screen when the installation is complete.
You will use the Test Dialer in this group later to test the Service Provider
software. For now, however, close out this window.
group window. Double click on the Control Panel icon, then on the
Telephony icon.
will open. Click Add to open the Add Location window. Enter the
extension number of the DBS extension being set up. If you need to dial a
digit to access an outside line, enter the digit in the appropriate fields. To
indicate a pause, use "W" (wait) following the digit - for example, "9W".
Be sure to also enter your area code and country code in the appropriate
fields. If using a calling card, click Calling Card Setup and add the
appropriate information.
Issued April 2000 DBS-92-570