Panasonic KX-TDA30 Features Manual page 306

1.26 Administrative Information Features
Number in
the Pattern
(6)
(7)
(8)
(9)
(10)
[Programmable Items]
Outgoing trunk call
Incoming trunk call
Outgoing intercom call
Log-in/Log-out status
ARS dial
306 Feature Guide
Item
Ring Shows the ring duration before answering a call in Minutes/
Seconds.
Duration Shows the duration of the trunk call in Hours/Minutes/Seconds.
Acc Code Shows the account code appended to the call. (→ 1.5.4.3 Account
(Account Code) Code Entry)
CD (Condition Shows other call information with the following codes:
Code) CL: Collect call
TR: Transfer
FW: FWD to trunk
D0: Call using DISA or TIE line service
RM: Remote maintenance (modem) (→ 2.3.1 PC Programming)
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
Cost Shows the call charge.
Item
Controls whether the outgoing trunk calls are shown. This setting
is common throughout the PBX. COS programming is also
required.
→ 2.17.1 [11-1] Main—SMDR—Print Information—Outgoing Call
→ [804] SMDR Outgoing Call Printing
Controls whether the incoming trunk calls are shown.
→ 2.17.1 [11-1] Main—SMDR—Print Information—Incoming Call
→ [805] SMDR Incoming Call Printing
Controls whether the outgoing intercom calls are recorded.
→ 2.17.1 [11-1] Main—SMDR—Print Information—Intercom Call
Controls whether the log-in/log-out status is recorded.
→ 2.17.1 [11-1] Main—SMDR—Print Information—Log-in / Log-
out
Controls whether the user-dialled number or the modified number
is shown.
The Host PBX Access code ("=" followed by the access code) can
be shown (as supplementary information) only when the modified
number is selected in this setting. (→ 1.10.1 Automatic Route
Selection (ARS))
→ 2.17.1 [11-1] Main—SMDR—SMDR Options—ARS Dial
Description
Description