Panasonic KX-TDA30 Features Manual page 279

Hide thumbs Also See for KX-TDA30:
Table of Contents

Advertisement

→ 2.9.19 [3-8-1] VM(DTMF) Group—System Settings—Others—Intercept Routing to the VPS
Sequence
Parameter
Answer by Mailbox
AA
None (Default)
[Example of a) & b)]
Trunk Call
Transfer
Operator
c)
Transferring to a Mailbox of the VPS
An extension user can transfer a call to a mailbox of the VPS so that the caller can leave a message
in the mailbox of the desired extension. (→ 1.12.1 Call Transfer) The extension user should use the
Voice Mail (VM) Transfer button, when transferring a call to the mailbox of the VPS. When the
extension user presses this button and enters the desired extension number, the PBX will transfer
the call to the VM group and dial the mailbox number of the desired extension with the required
command (after the VPS answers the call). Therefore the caller can leave a message without
knowing the mailbox number.
2.10.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
2.10.10 [4-2-1] Portable Station—Extension Settings
→ Type
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
2.10.17 [4-3] DSS Console—Flexible Button
→ Type
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
In AA Service Mode
Switching to VM command +
Recording message command (#6
+ H [H = Mailbox No.])
Switching to AA command (#8)
(DTMF commands are not sent. Work with default of the VPS.)
Sent "#6" + "102".
PBX
Switching to VM command
FWD, Intercept
Extn. 102
Transmitted Command
In VM Service Mode
Recording message command (H
[H = Mailbox No.])
Switching to AA command (#8)
mailbox number
VPS (In AA service mode)
VM Port 1
VM (DTMF)
Group
VM Port X
1.24 Voice Mail Features
VM Port 2
VM Port 3
Feature Guide
279

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda100Kx-tda200Kx-tda600Kx-tde100Kx-tde200

Table of Contents