Panasonic KX-TDA30 Features Manual page 251
Hide thumbs
Also See for KX-TDA30:
- Installation manual (428 pages) ,
- Features manual (412 pages) ,
- User manual (258 pages)
Table of Contents
Advertisement
Service
Call Forwarding (CF)—by
ISDN
Call Hold (HOLD)—by ISDN
Call Transfer (CT)—by ISDN
Three-party Conference
(3PTY)—by ISDN
Malicious Call Identification
(MCID)
Completion of Calls to Busy
Subscriber (CCBS)
3.
ISDN Centrex Service
An extension user can have access to the features of the ISDN Centrex Service of the telephone
company (e.g., Call Transfer). This is used by putting the current ISDN call on hold by sending a flash/
recall signal. This feature is enabled or disabled for each ISDN port.
→ 2.7.14 [1-1] Slot—BRI Port—ISDN CO—ISDN Centrex
→ 2.7.16 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO Setting—ISDN
Centrex
4.
Private Networking Connection (QSIG)
Private networking with QSIG is possible using an ISDN line. The QSIG mode, Master or Slave, can be
enabled on an ISDN port basis.
5.
ISDN Extension (→ 1.21.1.11 ISDN Extension)
An ISDN (BRI/PRI) port can be used for extension connection. While the extension connection is
enabled, ISDN terminal devices (e.g., ISDN telephone, G4 fax machine, PC) or a behind PBX can be
connected to the port.
When the ISDN port is in P-P configuration, one ISDN terminal device can be connected to the port.
1.21 Integrated Services Digital Network (ISDN) Service Features
Description & Reference
Forwards an incoming call to another outside party using the ISDN
service of the telephone company.
→ 1.21.1.4 Call Forwarding (CF)—by ISDN (P-MP)
→ 1.21.1.5 Call Forwarding (CF)—by ISDN (P-P)
Puts one ISDN call on hold.
→ 1.21.1.6 Call Hold (HOLD)—by ISDN
Transfers an ISDN call to an outside party. Call Transfer with
Announcement and Call Transfer without Announcement are
available.
→ 1.21.1.7 Call Transfer (CT)—by ISDN
Establishes a three-party conference call using the ISDN service of
the telephone company.
→ 1.21.1.8 Three-party Conference (3PTY)—by ISDN
An extension user can ask the telephone company to trace a
malicious caller. Information on the malicious call will be received
later on.
→ 1.21.1.9 Malicious Call Identification (MCID)
If an outside called party is busy, an extension can receive callback
ringing when the called party becomes free.
→ 1.21.1.10 Completion of Calls to Busy Subscriber (CCBS)
Feature Guide
251
Advertisement
Table of Contents
