Panasonic KX-TDA30 Features Manual page 255
Hide thumbs
Also See for KX-TDA30:
- Installation manual (428 pages) ,
- Features manual (412 pages) ,
- User manual (258 pages)
Table of Contents
Advertisement
Conditions
•
The availability of this feature is dependent on the contract with the telephone company.
•
CLIP/COLP features comply with the following European Telecommunication Standard (ETS)
specifications:
–
ETS 300 092 Calling Line Identification Presentation (CLIP) supplementary service.
–
ETS 300 097 Connected Line Identification Presentation (COLP) supplementary service.
•
CLIR/COLR features comply with the following European Telecommunication Standard (ETS)
specifications:
–
ETS 300 093 Calling Line Identification Restriction (CLIR) supplementary service.
–
ETS 300 098 Connected Line Identification Restriction (COLR) supplementary service.
•
The CLIP/COLP number for the connected ISDN port can be used for the ISDN terminal devices which
cannot be assigned their own CLIP/COLP number, such as a doorphone.
•
COLP/CLIR/COLR Assignment for Each Port
Each service can be enabled or disabled on each ISDN port of the PBX.
•
CLIR Button and COLR Button
It is possible to switch between CLIP and CLIR by pressing the CLIR button, and COLP and COLR by
pressing the COLR button. A flexible button can be customised as the CLIR or COLR button.
•
The CLIP/COLP number must match the telephone number provided by the telephone company.
Otherwise it will be ignored or replaced by another number.
•
When using a private network, the extension number assigned for each extension through system
programming is sent for CLIP/COLP. (→ 1.30.4.2 Calling/Connected Line Identification Presentation
(CLIP/COLP) and Calling/Connected Name Identification Presentation (CNIP/CONP)—by QSIG)
Programming Manual References
PC Programming Manual
2.7.14 [1-1] Slot—BRI Port
→ ISDN CO—Subscriber Number
→ Supplementary Service—COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT,
CCBS, AOC-D, AOC-E, 3PTY
2.7.16 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
→ CO Setting—Subscriber Number
→ Supplementary Service—COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT,
CCBS, AOC-D, AOC-E, 3PTY
2.7.19 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Subscriber Number
2.7.25 [1-1] Slot—E1 Port—Subscriber Number
2.8.8 [2-6-1] Numbering Plan—Main—Features
→ COLR Set / Cancel
→ CLIR Set / Cancel
→ Switch CLIP of CO Line / Extension
2.8.17 [2-9] System Options—Option 4—Send CLIP of CO Caller to ISDN—when Transfer (CLIP of Held
Party)
2.9.10 [3-5-1] Incoming Call Distribution Group—Group Settings—Main—CLIP on ICD Group Button
2.10.1 [4-1-1] Wired Extension—Extension Settings
→ Main—Extension Number
→ Option 1—CLIP ID
→ Option 3—CLIP on Extension/CO
1.21 Integrated Services Digital Network (ISDN) Service Features
Feature Guide
255
Advertisement
Table of Contents
