Program 900 - Group Status And Kitchen Printing Programming - Sam4s ER-900 Series Operation And Program Manual

Program 900 - Group Status and Kitchen Printing Programming

Group Programming includes two different parts - Group Status and Kitchen Printing Routing.
"Group Total is Added to the Total of All Groups on the Group Report?" is default to YES. However,
when a PLU links to more than one group, care must be taken to ensure total remain correct.
Generally, you will only "Add to Total" for one linked group. Contact your dealer for more
information if required..
Programming the Group Status and KP
1. Turn the control lock to the PGM position.
2. To begin the program, enter 9 0 0, press the SUBTL key.
3. Enter the number of the group you wish to program; press the X/TIME key.
4. Enter an option digit from the table below, press the SUBTL key.
N1
Address OPTION
N1
N2
N3
N4
5. To program additional groups, repeat from step 3, or press the CASH key to finalise the
program.
CASH
* Available only when COM #4 is present and NOT an USB port.
SAM4S ER-900 Series Electronic Cash Register AU
9 0 0 SUBTL
X/TIME
N2 N3 N4
Group total is added to the total of all groups on the
Group report?
Send to kitchen printer?
Print PLU of this group to KP PORT#: R
Print PLU of this group to KP PORT#: 1
Print PLU of this group to KP PORT#: 2
Print PLU of this group to KP PORT#: 3
Print PLU of this group to KP PORT#: 4*
Print RED on KP?
SBTL
(print a kitchen requisition)
Default values have been highlighted in bold print
VALUE =
Yes = 0
No = 1
Yes = 2
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 1
No = 0
Program Mode Programming • 201
SUM