Sam4s ER-900 Series Operation And Program Manual page 92

To maximise the convenience and minimise the complexity, the recommend programming is:
In Service Mode:
1. Program a MACRO function key to keyboard. MACRO 1 ~ 5 have been programmed on the
default default keyboard . Do this only those 5 MACRO keys has been used for some other
features. Please see Program 70 - Function Key Assignment Programming for detail.
In Program Mode:
1. Program one of the MACRO key descriptor to "New Table". Please see MACRO
Programming
2. Program the "New Table" MACRO key with keysequence "TABLE
REG-Mode. Please see MACRO Programming
Programming for detail.
3. Program CHECK# function keys with "Assigned by Register" sets to Yes. Please see
Function Key Programming
NOTE : There are more settings related to CHECK # and TABLE keys in printing on function key
themselves and in Print Option, please contact your dealer for detail.
80 • Operating Instructions
Program 711 - Macro Name Programming for detail.
CHECK #
Program 1500 - Macro Key Sequence
Program 70 for detail.
SAM4S ER-900 Series Electronic Cash Register AU
CHECK #" in