Program 200 - Plu Price/Halo Programming - Sam4s ER-900 Series Operation And Program Manual

Program 200 - PLU Price/HALO Programming

NOTE: If Price Level in S-Mode, Memory Allocation is set to 2, the 2
ALL PLUs and therefore must be programmed as well. Price of level 2 may be $0.00.
Before changing price, please find out what's the setting for Price Level in S-Mode, Memory
Allocation.
When Price Level is set to 2, and only one of the levels price is changing, the unchanged
price of another level must be entered as well, even if the original price of another level is
$0.00.
If a PLU is set open, the number entered will be a HALO (high amount lock out). If a PLU is set
preset, the amount entered will be a preset price. If a PLU is set with gallonage status, enter the price
per liter here. (Enter price per liter in tenths of a cent, i.e. 1299 for $1.299 per liter.)
Programming PLU/PLUs Price/HALO
1. Turn the control lock to the PGM position.
2. To begin the program, enter 2 0 0, press the SUBTL key.
3. Select the PLU or PLUs you wish to program in one of the following ways:
•
•
•
•
•
SAM4S ER-900 Series Electronic Cash Register AU
2 0 0 SUBTL
Press a PLU on the keyboard, or
PLU
Press the first PLU in a range of PLUs that are to receive the same setting then press
the last PLU, or
PLU PLU
Enter up to 15 digit number of the PLU and press the PLU key, or
Enter the PLU#,
up to 15 digits
Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last PLU number in the range; press the PLU
key, or
Enter the first PLU#,
up to 15 digits
For a barcode item, scan the barcode. (Only for single item.)
PLU
Enter the last PLU#,
PLU
up to 15 digits
nd
price level will allocated for
PLU
Program Mode Programming • 131