Program 90 - Function Key Halo Or Percentage Rate Programming - Sam4s ER-900 Series Operation And Program Manual

Program 90 - Function Key HALO or Percentage Rate Programming

Use Program 90 to program a high amount lock out (HALO) for a function key. Only specific keys
require this program. For example, you can set a HALO for the CASH, CHECK or CHARGE keys.
Refer to the specific function key programming information in this chapter to determine when the
HALO option is available.
Programming the Function Key HALO or Percentage Rate
1. Turn the control lock to the PGM position.
2. To begin the program, enter 9 0, press the SUBTL key.
3. Enter a HALO of up to eight digits, (or "0" for no HALO).
NOTE: If key is amount, enter 5 digit HALO, or 0 for no HALO. If key is percentage
4. Press the function key on the keyboard you wish to program.
FUNCTION
5. To program additional function keys, repeat from step 2, or press the CASH key to
finalise the program.
CASH
152 • Program Mode Programming
9 0 SUBTL
Enter up to 8 digit for HALO
up to 99999 for percentage rate
enter the percentage in a five-digit format, without the decimal (XX.XXX).
For example: for 10%, enter 10000; for 5.55%, enter 05550; for 99.999%,
enter 99999.
KEY
or
SAM4S ER-900 Series Electronic Cash Register AU