Use The Pc Utility To Convert The Image; Copy The Images To An Sd Card - Sam4s ER-900 Series Operation And Program Manual

2. Use the PC Utility to Convert the Image

1. Install the ER-900 PC Utility on your PC.
2. At your PC, start the ER-900 PC Utility. (Select Start, Programs, SHC PC UTILITY,
ER-900 PC UTILITY.) The Store Setting dialog box displays.
3. If you are starting the ER-900 PC Utility for the first time, you must define a store name,
or if a store is already defined, you can select the store from the drop down list. After the
store is defined or selected, click Close. The PC Utility program starts.
4. Move the .bmp logos you wish to use into the store directory
(i.e. C:\ER-900PC\storename.)
5. At the PC Utility, choose Convert Logo Image from the Utility menu. The Bmp dialog
box displays.
6. Click FILE OPEN. Select the bitmap image you wish to use from the Open dialog and
click the Open command button.
7. Click the SAVE AS PRE IMG or SAVE AS POST IMG button.
8. When the image is selected, click OK. Verify that the message "Save As UserPre.Img" or
"Save As UserPost.Img" displays. If the file is too large, and cannot be loaded, the
message "File Size Error" displays.

3. Copy the Images to an SD Card

The PC Utility will create two image files:
•
•
They will be located in your PC at:
Copy the images to the following path on your SD card:
Important: In the path: C:\ER-900PC\<Store Name>, the store name is the name you have
defined as the store in the PC Utility.
Note: You must use the same store name in the ER-900 Series ECR at System Option #30.
112 • Service Mode Programming
USERPRE.IMG
USERPOST.IMG
C:\ER-900PC\<Store Name>
SD\\ER900\PgmBack\<Store Name>
SAM4S ER-900 Series Electronic Cash Register AU