Program 70 - Function Key Options Programming - Sam4s ER-380 Operation And Program Manual

Program 70 - Function Key Options Programming

Use Program 70 to set options for function keys. Because of the differences inherent in function keys,
individual options will be different. See the specific instructions for each key in this chapter to find
the options for each key.
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 7 0, press the SBTL key.
7
3. Enter the values for the option digit or digits. Depending on the function key you are
programming, you may enter up to six digits N1 through N6. Determine the values for N1
through N6 by referring to the specific function key information that follows. (You do not
need to enter preceding zeros. For example, if the function key offers six digits, N1
through N6 and you are only selecting a value for N6, just enter the value for N6.) Press the
function key you wish to program.
N1
4. To program additional function keys, repeat from step 3, or press the CASH key to finalize
the program.
CASH
ER-380 / ER-380M Electronic Cash Register AU
0 SBT L
N2 N3 N 4 N 5
FUNCTION
N6
KEY
Program Mode Programming • 115