1. Manuals
  2. Brands
  3. Planet Manuals
  4. Gateway
  5. ISG-101
  6. User manual

Planet ISG-101 User Manual

Internet subscriber gateway
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Copyright
Copyright (C) 2002 PLANET Technology Corp. All rights reserved.
The products and programs described in this User's Manual are licensed products of PLANET
Technology, This User's Manual contains proprietary information protected by copyright, and this
User's Manual and all accompanying hardware, software, and documentation are copyrighted.
No part of this User's Manual may be copied, photocopied, reproduced, translated, or reduced to
any electronic medium or machine-readable form by any means by electronic or mechanical.
Including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, and without the prior express written permission of
PLANET Technology.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments
and applications, and makes no warranty and representation, either implied or expressed, with
respect to the quality, performance, merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User's Manual is accurate; PLANET disclaims
liability for any inaccuracies or omissions that may have occurred.
Information in this User's Manual is subject to change without notice and does not represent a
commitment on the part of PLANET. PLANET assumes no responsibility for any inaccuracies
that may be contained in this User's Manual. PLANET makes no commitment to update or keep
current the information in this User's Manual, and reserves the right to make improvements to
this User's Manual and/or to the products described in this User's Manual, at any time without
notice.
If you find information in this manual that is incorrect, misleading, or incomplete, we would
appreciate your comments and suggestions.
CE mark Warning
The is a class B device, In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
Trademarks
The PLANET logo is a trademark of PLANET Technology. This documentation may refer to
numerous hardware and software products by their trade names. In most, if not all cases, these
designations are claimed as trademarks or registered trademarks by their respective companies.
Revision
User's Manual for PLANET Internet Subscriber Gateway:
Model: ISG-101
Rev: 1.0 (Jan. 2002)
Part No. EM-ISG101V1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ISG-101 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Planet ISG-101

Summary of Contents for Planet ISG-101

  • Page 1 PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s Manual. PLANET makes no commitment to update or keep current the information in this User’s Manual, and reserves the right to make improvements to this User’s Manual and/or to the products described in this User’s Manual, at any time without...

  • Page 2: Table Of Contents

    4-1-8 Restart………………………………………………………………………… 23 4-3-2 Subscriber Limitation…………………………………………………………… 46 4-1-9 Factory Setting………………………………………………………………. 24 4-3-3 Extra Feature…………………………………………………………………… 50 4-2 Web-Based Configurator…………………………………………………………… 24 Appendix A: Signal Connection Arrangements………………………………………….. 56 4-2-1 Login…………………………………………………………………………... 25 Appendix B: Regulations/EMI Compliance……………………………………………… 59 4-2-2 Main Menu…………………………………………………………………… 26 PLANET ISG-101 Internet Subscriber Gateway...

  • Page 3: Introduction

    Never remove or open the cover. You may suffer serious injury if you touch these parts. The ISG-101 is powered from 100/240 VAC. A standard IEC connector is used for the The Internet Subscriber Gateway ISG-101 is deployed in a broadband service network for power cable.

  • Page 4: Product Description

    90~240 V. Front Panel 2. System Fan/Vents: This fan is used to circulate air inside the ISG-101 and also to dissipate heat. The vents on both sides also serve the same purpose. Do not block these openings, and leave adequate space at the rear and sides of the device.
  • Page 5 The Internet Subscriber Gateway contains a user account database. And when the Address Translate Function subscriber starts to access the Internet, the ISG-101 will send a Web page to ask checking This function can accommodate all network configuration, including DHCP, DNS, proxies user’s ID and password.

  • Page 6: Installation

    Articles 110-16, 110-17, and 110-18. It is suitable for mounting over a noncombustible surface only. The ISG-101 can be mounted in a rack, or on the table or shelf. Locate the unit near the outlet. And the ISG-101 ships with two brackets and six screws for mounting in a 19” rack.

  • Page 7: Getting Started

    Electrical Requirements Figure 3-3 ISG-101 basic connections The ISG-101 is powered from 100/240 VAC. A standard IEC connector is used for the power cable. Follow all applicable electrical codes. Frame ground should be tied to a common grounding point using #18AWG cable.

  • Page 8: User Interface

    To access the ISG-101 User Interface, the system operator needs to connect a VT100 terminal 13. If you have not completed initial power up, power up the ISG-101 now. You will see Figure and a PC running a VT100 compatible terminal emulation program to the ISG-101 Console 4-1.

  • Page 9: Login

    4) WAN Configuration: Enter WAN port IP Address Configuration such like IP address, subnet mask and gateway. The Web server port default is 80, however some user may set up the ISG-101 under the NAT network. The administrator has to set the special Web server port so Figure 4-3 Main Menu Screen that ISG-101 can be remote access under NAT network.

  • Page 10: System Status

    DHCP Relay and assign a valid DHCP server IP address. 4-1-4 System Status Server IP Address: Tab the DHCP relay server IP address. System Status Agent IP Address: Tab the relay agent IP address, normally enter the ISG-101 WAN IP is OK. System Name : ISG-101 Console Baud Rate : 9600 Notice: You must disable the DHCP server before enable the DHCP relay.

  • Page 11: Utilities Menu

    Figure 4-9 Restart Screen TFTP server IP Address: Enter the TFTP server IP address. ISG-101 system can be restart by software; the administrator doesn’t need to turn off the power. Download Filename: Enter the Download file name. This function can help you when making multiple changes to different menu function and you How to make a TFTP download want to reboot just one time after completing all your changes.

  • Page 12: Factory Setting

    (“admin”) and password (default is “password”) in the Login screen. Figure 4-10 Factory Setting Screen If you enter “Y” the ISG-101 system will erase all setting, and back to the original factory setting. 4. ISG-101 Web-based Configurator session has now started and you can navigate in this configuration utility just as easily as in a regular Internet www site.

  • Page 13: Main Menu

    ISG-101 system. Because some network devices might be constructed under the Internet Subscriber Gateway. However these devices needn’t be checked and authorized. The ISG-101 provides a pass through table and the administrator can control which devices can be pass through with authentication.

  • Page 14: Subscriber Management

    Notice: The secondary and tertiary DNS servers are only initialized if the primary DNS server is ISG-101 under the NAT network. The administrator has to set the special Web server port so that ISG-101 can be remote access under NAT network.

  • Page 15: Subscriber Control

    There are two different types for subscriber management. One is the proprietary or internal Therefore, the ISG-101 provides to import a subscriber’s data base file via TFTP server. authentication system and the other is RADIUS server. The maximum subscriber number of 4-2-6 Subscriber Control internal authentication system is 250.

  • Page 16: Customize Login Ui

    Figure 4-17 Web-based Configuator Customer Login UI Screen Selection: The ISG-101 provides two different login page formats. One is “Standard”, this is ISG-101 default login page, can’t be changed. The other is ”Advanced”, that is to say, administrator can design the subscriber login page by himself.

  • Page 17: Add Subscribers

    “username” column and password in the “password” column. For the username 1~32 characters are allowed. For the password 0-20 characters are allowed. And you can add 10 records for once. Figure 4-20 Web-Based Configurator Background Color Grid Screen PLANET ISG-101 Internet Subscriber Gateway...

  • Page 18: Subscribers List

    “Delete” button to delete subscribers’ data from the table. Figure 4-24 Web-Based Configurator Current Users Screen To maintain a subscriber database via web UI might not be so convenient. Therefore, the PLANET ISG-101 Internet Subscriber Gateway...

  • Page 19: Advertisement Link Configurations

    And these 10 websites will display to the subscribers at random user2,password2 when the subscribers login in the ISG-101 system. The input format can be “http://www.planet.com.tw” or “www.planet.com.tw”. user3,passowrd3 Notice: The maximum allowed input string is 80 characters.

  • Page 20: Pass Through Ip & Mac

    For example, if you have an FTP server (port 21) at 192.168.123.1and a Web server (port 80) at 192.168.123.2, then you need to specify the following virtual server-mapping table: There are some devices such like server or gateway must pass through the ISG-101, or ISG-101 will check their packets and ask for username and password.

  • Page 21: System Status

    1) Firmware Upgrade: Allow administrator to upgrade the ISG-101 last firmware. 2) Change Password: Allow administrator to change password. Figure 4-30 Web Configurator System Status Screen Display the ISG-101 system basic information including the System Name, Console Port Baud Rate, WAN, DHCP Configuration, DNS, E-mail Server Information. PLANET ISG-101...

  • Page 22: Firmware Upgrade

    4-2-21 Logout The ISG-101 uses TFTP Download to upgrade firmware. User needs to specify TFTP server IP address and the filename that you wish to download. TFTP server IP Address: Enter the TFTP server IP address.

  • Page 23: Subscriber Login Steps

    4) After finishing the register process, subscriber can use E-mail, Web Browser, NetMeeting, and so on. If user disconnects over the Logout timer set in Subscriber Control (see also 4-2-6), the ISG-101 will regard as the user already logout. If user wants to connect the Internet again, he must have to re-login.
  • Page 24 1. Some subscribers might have the proxy server configuration in the web browser, for this case Subscriber Fixed NAT IP was Conflict with one the subscribers must cancel the proxy server settings. However, PLANET will support the PC which outside the ISG-101 WAN port but in new firmware in the future to leave out this effort.

  • Page 25: Extra Feature

    This function support only when you enable the Radius Server, the Connecting Duration will control the time “how many minutes the user can connect to the server. And please enter the IP of the Account Server and URL page that you would like subscriber linked. PLANET ISG-101 Internet Subscriber Gateway...
  • Page 26 Select billing mechanism “Enable” and will display “Unit Time” and “Unit Cost” and “Currency “ column. The unit time can select “by Day” or “by hour”. These mean that the charge unit may PLANET ISG-101 Internet Subscriber Gateway...
  • Page 27 “Apply“ button. And administrator can press the Username, Login Time or Expired Time button to sorting the subscriber’s information. PLANET ISG-101 Internet Subscriber Gateway...

  • Page 28: Appendix A: Signal Connection Arrangements

    Appendix A: Signal Connection Arrangements RJ-45 Ethernet Port The ISG-101 RJ-45 Ethernet port can connect to any networking device that use a standard LAN interface, such as a Hub/Switch Hub or Router. Use unshielded twisted-pair (UTP) or shield twisted-pair (STP) cable to connect the networking device to the RJ-45 Ethernet port.

  • Page 29: Appendix B: Regulations/Emi Compliance

    PIN No. Mnemonic Function FCC Regulatory Statement Received Line Signal Detector to ISG-101. Part 15-Class B compliant device Transmitted Data from ISG-101 This device complies with Part 15 of the FCC Rules. Operation is subject to the following Received Data to ISG-101...

Table of Contents