Table of Contents
Advertisement
Appendix B. FRONT PANEL
B.1
Introduction
The Universal Satellite Modem offers the ability to perform field upgrades of the modem's
feature set quickly and easily from the front panel. Purchased upgrades will become part of the
modems permanent configuration. Demonstration upgrades will enable the optional features for a
30-day evaluation period.
B.2
Required Equipment
The Universal Satellite Modem is the only equipment required for this procedure.
B.3
Upgrade Procedure
The following paragraphs describe the procedure for permanently updating the feature set of the
Universal Satellite Modem
1. The following steps allow users to quickly determine from the front panel whether or not
the desired feature(s) are supported by the hardware currently installed in the modem.
a. From the modem's Main Menu, scroll right to the SYSTEM Menu.
b. Scroll down.
c. Scroll right to the HW/FW CONFIG Menu.
d. Scroll down
e. Scroll right to the FEATURES Menu.
f.
Scroll down.
g. Scroll right to the UPGRADE LIST Menu.
h. Scroll down.
i.
Scroll right through the available list of options.
The top line identifies the options and the second line identifies the following options status:
INSTALLED indicates that the option is already available as part of the modems feature set.
HW & KEY REQ indicates that additional hardware is required to support the option. Contact
your Radyne sales representative for more information regarding the required hardware upgrade.
KEY CODE REQ indicates that the desired option is available as a front panel upgrade.
MN-DMD50 Revision 4
UPGRADE PROCEDURE
B–1
Advertisement
Table of Contents
