Table of Contents
Advertisement
DMD50 Universal Satellite Modem
J.1.5 Setting Up The DMD20/DMD20 LBST Ethernet Bridge To Operate Like
A FIFO
In certain circumstances, it may be desirable to have the Ethernet interface operate in a FIFO like
manner with no reordering of packets. This can be established by using a single port on the
Ethernet interface and setting the Ethernet QOS Type to Port Based and the Ethernet QOS
Queue to Strict Priority. When Setup and used in theis manner, the packets will be transmitted in
the exact order in which they are received.
MN-DMD50 Revision 4
Figure J-1. Point-to-Multipoint with Daisy Chaining
Ethernet Data Interface Setup
J–3
Advertisement
Table of Contents
