Appendix B - Software Upgrade Procedure; Terminal Software Upgrade; Required Equipment; Upgrade Procedure - Radyne OM20 Installation And Operation Manual

Universal outdoor modem
Hide thumbs Also See for OM20:
Table of Contents

Advertisement

OM20 Universal Outdoor Modem
Software Upgrade Procedure
The outdoor modem software may be upgraded via the terminal or the web interface.
B.0

Terminal Software Upgrade

The OM20 Outdoor Modem offers the ability to perform field upgrades of the modem's feature set
quickly and easily from the Terminal Port. Purchased upgrades will become part of the modems
permanent configuration. Demonstration upgrades will enable the optional features for a 30-day
evaluation period.
B.1

Required Equipment

The OM20 Universal Satellite Modem is the only equipment required for this procedure.
B.2

Upgrade Procedure

The following paragraphs describe the procedure for permanently updating the feature set of the
OM20 Universal Satellite Modem
1. The following steps allow users to quickly determine from the GUI Interface whether or
not the desired feature(s) are supported by the hardware currently installed in the
modem.
Using the GUI interface navigate to the Features menu under "System" gel-tab. Click on
"features". This will show the available features and all features checked are the
purchased/installed features.
2. Contact Radyne Customer Service with the Unit ID and Desired Upgrades. The
modem's Unit ID can be found in the Terminal interface as follows:
a.
b.
The value displayed on the top line of this menu is the 12-digit Unit ID. It is displayed as
3 sets of 4 digits in a dot-delineated format as follows:
1 2 3 4 . 1 2 3 4 . 1 2 3 4
Your Radyne Sales Representative will ask you for this number along with your desired
feature set upgrades when placing your order.
3. Once your order has been processed, you will be issued a 12-digit feature set upgrade
code. This code is only good on the modem for which it was ordered. To enter this code
from the terminal port, perform the following:
a.
b.
c.
d.
TM116 – Rev. 1.2
From the main menu, the Features menu.
"Feature Id: is the unit ID number
From the "Enter Selection Number" line type in 45.
Press Enter.
Enter the new code and press "Enter"
Your system is now up graded.
Appendix B
B
B-
1

Advertisement

Table of Contents
loading

Table of Contents