Table of Contents
Advertisement
DMD50 Universal Satellite Modem
TRAP VERSION
AUTHORIZATION
RD COMMUNITY
RDWR COMMUNITY
FTP (menu)
USER ID
PASSWORD
WEB
CONFIRMATION
USER 1
ACCESS GROUP
MN-DMD50 Revision 4
The mib2 context allows a user with appropriate authentication
to access the mib2 OIDs and the SNMP OIDs. These are of
interest primarily to network operators not controlling the
satellite link.
The dev context allows a user with appropriate authentication to
access the device control portion of the MIB. These OIDs are
used to control the devices satellite link and operation.
{V1, V2}
This controls the type of message format used when a message
trap is generated by the equipment and bound for a SNMP Host.
Messages will only be sent if the unit has been authorized to do
so.
{TRAPS OFF, TRAPS ON}
This controls the type of message format used when a message
trap is generated by the equipment and bound for a SNMP host.
Messages will only be sent if the unit has been authorized to do
so.
{16 characters of name}
This menu is only displayed when SNMP VERSION is set to V1
& V2.
This is the community that a host must be acting within when an
OID variable is requested by a V1/V2 SNMP message.
{16 characters of name}
This menu is only displayed when SNMP VERSION is set to V1
& V2.
This is the community that a host must be acting within when an
OID variable is being changed by a V1/V2 SNMP message.
Allows the user to enter the user identification for access to an
FTP session.
Allows the user to enter the password for access to an FTP
session.
{ENABLE, DISABLE}
{NO GROUP, GUEST, OPER, ADMIN}
Access rights represent the following:
No Group: Denies Access
User Interfaces
4–34
Advertisement
Table of Contents
