Radyne DMD50 Installation And Operation Manual page 8

DMD50 Universal Satellite Modem
G.703 T2 (100)
G.703 E2
7.9 IDR/ESC T3/E3/STS1 Interface (Optional)
G.703 T1 (DSX1)
G.703 E1
G.703 T2 (DSX2)
G.703 E2
G.703 E3
G.703 T3
G.703 STS1
7.10 IBS/Synchronous Interface (Standard)
RS-422/-530
ITU V.35
RS-232
7.11 High-Speed Serial Interface (HSSI)
HSSI:
7.12 ASI
ASI:
RS-422 Parallel:
ASI:
LVDS Parallel:
7.13 DVB/M2P
DVB/M2P:
7.14 Ethernet Data Interface (Optional)
Ethernet Data Interface
7.15 Gigi Ethernet Data Interface (Optional)
Ethernet Data Interface
MN-DMD50 Revision 4
6.312 Mbps, 75 Ohm Unbalanced and 110 Ohm Balanced, B8ZS
and B6ZS
8.448 Mbps, 75 Ohm BNC, Unbalanced, HDB3
1.544 Mbps, 100-Ohm Balanced, AMI and B8ZS
2.048 Mbps, 75-Ohm BNC, Unbalanced and 120-Ohm
Balanced, HDB3
6.312 Mbps, 75-Ohm BNC, Unbalanced and 110-Ohm
Balanced, B8ZS and B6ZS
8.448 Mbps, 75-Ohm BNC, Unbalanced, HDB3
34.368 Mbps, 75-Ohm BNC, Unbalanced
44.736 Mbps, 75-Ohm BNC, Unbalanced
51.84Mbps, 75-Ohm BNC, Unbalanced
All Rates, Differential, Clock/Data, DCE
All Rates, Differential, Clock/Data, DCE
(DCE up to 200 Kbps)
HSSI, Serial, 50-Pin SCSI-2 Type Connector (Female)
ASI, Serial, 75 Ohm BNC (Female)
DVB/M2P, Parallel, RS-422, DB-25 (Female)
ASI, Serial, 75 Ohm BNC (Female)
DVB/M2P, Parallel, LVDS, DB-25 (Female)
DB-25 Female Connector. It complies with RS-422 Electrical
Specifications.
Four RJ-45, Auto-Crossover, Auto-Sensing, 10/100 Ethernet
Data Ports. Complies with IEEE 802.3 and IEEE 802.3u.
Three RJ-45, Auto-Crossover, Auto-Sensing, 10/100/1000
Ethernet Data Ports. Complies with IEEE 802.3 and IEEE
802.3u.
ER-MNDMD50-EA4 Rev -
Technical Specifications
7–4